Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual page 180

Chapter 7 Installing Internal Options
7
Loosen the screw on the rear of the server.
[Rear of the Server]
8
Slide the top cover slowly to the rear and lift it to remove from the server.
■ How to Attach the Top Cover
To attach the top cover, simply reverse the removal procedures.
Make sure that no tools or unnecessary components were left inside the server before attaching the
top cover back into place.
When sliding the server backward, press the locks on both of the rails to unlock.
Before turning on the server, make sure that the top cover is attached.
180
Top cover