Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual page 135

Kernel Memory Dump
Information of only kernel memory space is recorded. The file is stored in the directory displayed in the
[Dump file] box. Capacity required for kernel memory dump is as follows:
• Paging file: Depending on installed physical memory amount
For 256 to 1373MB: Installed physical memory × 1.5
For 1374MB or more: 2GB + 16MB in 32 bit system
• Memory dump file: Depending on the used amount of kernel-mode address space during STOP
Small Memory Dump
Minimum amount of useful information for problem identification is recorded. If this option is specified,
a new file is created each time the system unexpectedly stops.
History of such files is stored in the directory displayed in [Small dump directory].
• Paging file: 2MB or more
• Memory dump file: 64KB or 128KB
Memory Dump File Setting
Set up the memory dump file according to the following procedures:
1
Log on to the server with administrator privileges.
2
Check free space of the drive where the memory dump file is to be stored.
Check the required amount of free space according to "
( pg.134).
If the drive has no free space, refer to "
3
Click [Start] → [Control Panel] → [System].
The [System Properties] window appears.
Installed physical memory + 128MB in 64 bit system
Cannot Collect the Memory Dump" ( pg.241).
PRIMERGY RX100 S4 User's Guide
Checking Hard Disk Free Space"
5
135