Creating Driver Disks; Required Driver Disks - Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual

Chapter 4 Manual OS Installation

4.1 Creating Driver Disks

When installing the OS manually, it is necessary to create driver installation disks
beforehand. Also, driver disks must be created when you add an expansion card
during server operation.

4.1.1 Required Driver Disks

Prepare for the floppy disks in advance to create the driver disks. A floppy disk is necessary for each
driver.
The driver disks to be created differ depending on the OS to be installed.
Standard driver provided with the OS is installed automatically at the OS installation.
You need a ServerStart Disc 1 CD-ROM to install the driver provided with the ServerStart CD-ROM.
Prepare for it in advance.
For Windows Server 2003 x64
Expansion card/onboard controller
Chipset
Graphic controller
Onboard SAS controller
Onboard LAN
Eth. Ctrl 2x1000-BASE-T Cu (PG-1862)/
Eth. Ctrl 1000-BASE-SX Fibre LC lp
(PG-1882L)/
Eth. Ctrl 1000-BASE-T Cu lp (PG-1892L)
Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T lp
(PG-2861L)
Eth. Ctrl 1x1Gbit PCI-E 1000-BASE-T lp
(PG-289L)
SCSI Ctrl U160 lp (PG-1301L)
Other expansion cards
*1: Created by the ServerStart FloppyBuilder function
110
table: Drivers Required for Installing Windows Server 2003 x64
Driver provided with the ServerStart CD-ROM
Driver provided with the ServerStart CD-ROM
Integrated Mirroring SAS Driver Windows 2003 for x64
Edition Drivers Disk V1.21.13L10
RX100 S4 Onboard LAN Driver Windows 2003 x64 Drivers
Disk Ver9.25.0.0
PG-185x/186x/188x/189x LAN Driver Windows 2003 for x64
Edition Drivers Disk Ver10.3
PG-286x LAN Driver Windows 2003 for x64 Edition Drivers
Disk Ver10.3
PG-28x LAN Driver Windows 2003 for x64 Edition Drivers
Disk Ver10.3
Standard driver provided with the OS
Driver supplied with the expansion card
Driver
*1
*1
*1
*1
*1