Ipmi Submenu - Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual

Item
Power Off Source
Software
Power Button
Power Failure Recovery

8.2.10 IPMI Submenu

This submenu appears when selecting "IPMI" in the [Advanced] menu.
Use this submenu to configure server management settings.
Main Advanced
SEL Load
Clear System Event Log
Event Log Full Mode
iRMC Time Sync
System Event Log
SDRR Browser
LAN Settings
F1 Help
Esc Exit
Item
SEL Load
Clear System Event Log
Event Log Full Mode
table: Items on the Power On/Off Submenu
Setting
Enabled (Unchangeable)
Enabled (Unchangeable)
• Always On
• Always Off
• Previous State
(At the time of
purchase)
Security Server
IPMI
xx%
[Disabled]
[Overwrite]
[Enabled]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the IPMI Submenu
Setting
Displays the usage of event log space as a percentage.
Disabled (Unchangeable)
Overwrite
(Unchangeable)
PRIMERGY RX100 S4 User's Guide
Description
Sets to enable the power to be turned off using a
program or the operating system.
Sets to allow the use of the power switch for
turning the power off, when the ACPI function is
disabled.
Sets to turn the power on or off after a temporary
main power outage due to power interruption, etc.
Note:
For UPS scheduled operation, set to
[Always On]. Otherwise, the power may
not be turned on at the specified time.
Exit
Item Specific Help
Setup Defaults
F9
Save and Exit
Sub-Menu F10
Description
Sets to clear the event log or not.
Sets to overwrite the event log when space available
for it becomes full.
Note:
Changing this setting deletes the existing
event log. Before making changes, refer to
"9.3.1 How to Use Server Management Tools"
( pg.245) for saving the event log.
8
219