Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual page 153

Creating a Configuration Tool Floppy Disk
Start up ServerStart and confirm that the [Welcome to ServerStart] window is displayed.
1
Start up ServerStart and click [FloppyBuilder].
The [ServerStart FloppyBuilder] window appears.
2
Click [Hardware Configuration Tools].
3
Click the tool you want to create.
Insert the prepared floppy disk by following the message.
4
Perform the subsequent operations according to the messages on the window.
The floppy disk will be formatted automatically and file copying will start.
The respective tools will be created automatically. When a message appears indicating that the
disk is created, click [OK] and eject the disk.
PRIMERGY RX100 S4 User's Guide
5
153