Standard Ide Submenu - Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual

8.2.3 Standard IDE Submenu

This submenu appears when selecting "Standard IDE" in the [Main] menu.
Sets the operating mode for connected IDE devices. When the hard disk drivers are installed to Standard
IDE Master or Standard IDE Slave, each menu is displayed. Displayed items differ from drive to drive.
Main Advanced
Standard IDE:
PIO Mode:
DMA Mode:
Firmware:
F1 Help
Exit
Esc
Item
PIO Mode
DMA Mode
Firmware
Security Server
[******]
PIO 4
UDMA 2
****
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the Standard IDE Submenu
Setting
PIO 4
UDMA 2
Displays the firmware version.
PRIMERGY RX100 S4 User's Guide
Exit
Item Specific Help
Setup Defaults
F9
Sub-Menu F10 Save and Exit
Description
Displays the current Programmed I/O (PIO)
transfer mode. The fastest PIO transfer mode
among connected IDE devices is automatically set.
Displays the current Direct Memory Access (DMA)
data transfer mode. The fastest DMA transfer mode
among connected IDE devices is automatically set.
8
209