Selecting A Setting For Oversized Paper (Wide Paper Settings) - Konica Minolta bizhub C650 User Manual

Copy paper/original documents
Using the keyboard that appears, type in the name of the key, touch [OK], and then touch [Close]. For
details on typing in text, refer to "Entering text" on page 12-2.
7
Touch [OK], and then touch [OK] in the next three screens that appear.
The Basic screen appears again.

Selecting a setting for oversized paper (Wide Paper settings)

Wide paper can be loaded into tray 1 or tray 2 or the bypass tray.
Wide paper is a size larger than the standard size and allows copies of standard-sized documents to be
printed so that there is no loss at the edges. For example, if 11 × 17 wide paper is used, an area up to 12-1/4
× 18 can be printed, allowing the entire area of an 11 × 17-size document to be printed.
If wide paper is loaded, it will be necessary to enter the paper size.
The following procedure describes how to specify the setting for wide paper loaded into the bypass tray.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
C650
6
6-13