Selecting A Setting For Oversized Paper (Wide Paper Settings) - Konica Minolta bizhub C451 User Manual

Copy operations

Hide thumbs Also See for bizhub C451:

Table of Contents

Copy paper/original documents

To change the name of a memory key, touch [Change Custom Size

Name], and then touch the key to be renamed.

Using the keyboard that appears, type in the name of the key, touch

[OK], and then touch [Close]. For details on typing in text, refer to "En-

tering text" on page 12-2.

Touch [OK], and then touch [OK] in the next three screens that appear.

The Basic screen appears again.

Selecting a setting for oversized paper (Wide Paper settings)

Wide paper can be loaded into tray 1 or tray 2 or the bypass tray.

Wide paper is a size larger than the standard size and allows copies of stand-

ard-sized documents to be printed so that there is no loss at the edges. For

example, if 11 × 17 wide paper is used, an area up to 12-1/4 × 18 can be

printed, allowing the entire area of an 11 × 17-size document to be printed.

If wide paper is loaded, it will be necessary to enter the paper size.

The following procedure describes how to specify the setting for wide paper

loaded into the bypass tray.