Adjusting The Copy Color Quality (Color Adjust Parameters); To Adjust The Color Adjust Parameters - Konica Minolta bizhub C650 User Manual
Copy operations
Hide thumbs
Also See for bizhub C650:
- Service manual (1503 pages) ,
- User manual (574 pages) ,
- Print operations (390 pages)
Table of Contents
Advertisement
Application functions
7.11
Adjusting the copy color quality (Color Adjust parameters)
You can adjust the quality of color copies as desired.
There are 10 Color Adjust parameters that can be used in any combination. In addition, you can check the
specified settings by printing a proof copy.
Parameter
Brightness
Contrast
Saturation
Red
Green
Blue
Hue
Copy Density
Sharpness
Color Balance
!
Detail
For sample images of the Color Adjust parameters, refer to "Color Adjust parameters and samples" on
page 7-2.
To adjust the Color Adjust parameters
As an example, the procedure for adjusting the Brightness parameter is described below.
1
Touch [Application], and then touch [Edit Color].
–
To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
The Edit Color screen appears.
C650
Description
This parameter can be used to make the image either lighter or darker.
This parameter can be used to make the image either crisper or smoother.
This parameter can be used to adjust the vividness of the colors in the image.
This parameter can be used to adjust the level of red in the image.
This parameter can be used to adjust the level of green in the image.
This parameter can be used to adjust the level of blue in the image.
This parameter can be used to adjust the hue. The hue is divided into red, blue and yel-
low. By adjusting the hue, the image can be made either more reddish or more bluish.
This parameter can be used to adjust the copy density.
This parameter emphasizes the edges of text so that they can be read more easily. In
addition, this parameter can be used to make an overly sharp image softer or a blurry
image clearer.
This parameter can be used to adjust the individual concentrations of yellow (Y), magen-
ta (M), cyan (C), and black (K).
•
Increasing the red tinge increases the amount of yellow and magenta or decreases
the amount of cyan.
•
Increasing the green tinge increases the amount of yellow and cyan or decreases the
amount of magenta.
•
Increasing the blue tinge increases the amount of magenta and cyan or decreases
the amount of yellow.
•
Increasing the yellow tinge increases the amount of yellow or decreases the amount
of magenta and cyan.
•
Increasing the black tinge increases the amount of black.
7
7-48
Advertisement
Table of Contents
Troubleshooting
