Konica Minolta bizhub C650 User Manual page 157

Copy operations

Hide thumbs Also See for bizhub C650:

Table of Contents

Additional copy operations

For details on typing in text, refer to "Entering text" on page 12-2.

After typing in the name, touch [OK].

The copy program can be given the same name as a copy program that has already been registered.

To stop specifying the name of the copy program, touch [Cancel].

The Recall Copy Program screen appears again. The copy program is registered and a button with the

entered copy program name appears.

Can the copy program name be corrected?

% To change the entered copy program name, touch the button whose name is to be changed, and

then touch [Edit Name]. The Edit Name screen appears. Return to step 4 and repeat the procedure

to change the copy program name.

Can the specified settings for a copy program be checked?

% To check the programmed copy settings, touch the button for the desired copy program, and then

touch [Check Program Settings]. For details, refer to "Copying with programmed copy settings

(Mode Memory)" on page 3-12.

Troubleshooting