To Fold Copies In Three ("Tri-Fold" Setting) - Konica Minolta bizhub C650 User Manual

Basic copy operations
– If a cover sheet is added with the "Cover Sheet" function, the cover sheet (53-1/4 lb) cannot be
stapled.
– When the "Center Staple & Fold" setting is selected, the following factory default settings are
automatically selected.
1-Sided > 2-Sided
Booklet
Recommended zoom ratio (64.7%) when the "Booklet" function is selected
– When the "Center Staple & Fold" setting is selected, the following Finishing settings are not
available.
Group
Offset
Staple
Punch
– To cancel the "Center Staple & Fold" setting, touch [No] or the button for a different setting.
4
Touch [OK], and then touch [OK] again.

To fold copies in three ("Tri-Fold" setting)

When Finisher FS-608 is installed
Paper weight
17 lb to 24 lb
Number of folded sheets
1 sheet
!
Detail
When copies are to be folded in three, settings can be specified to select whether the printed side is on
the inside or the outside. For details on selecting the setting, refer to "Copier Setting" on page 11-31.
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
C650
Paper size
8-1/2 × 11 w, A4 w, 16K w
Maximum number of sets
50 sets or less
Maximum number of tri-folded
sheets
1 sheet
2
2-71