Selecting Single-Sided Copies - Konica Minolta bizhub C650 User Manual

Basic copy operations

Selecting single-sided copies

0 As the factory default, "1-Sided > 1-Sided" is selected.
0 For details on using the original glass to scan multi-page documents, refer to "Scanning a multi-page
document from the original glass" on page 2-12.
1
In the Basic screen, touch [Duplex/Combine].
The Duplex/Combine screen appears.
2
Touch [1-Sided > 1-Sided] or [2-Sided > 1-Sided].
– If "2-Sided > 1-Sided" is selected, specify the position of the binding margin and the orientation of
the loaded document, otherwise the copies will not be printed as desired.
– If the binding position for the document is set to "Auto", the position of the binding margin is
automatically selected. A binding margin along the long side of the paper is selected if the document
length is 11-11/16 inch or less. If the document length is more than
11-11/16 inch, a binding margin along the short side of the paper is selected.
– If "Auto" is selected under "Original Bind Direction", the binding margin is set at the top or at the left.
C650
2
2-44