Emptying The Punch Scrap Box - Konica Minolta bizhub C650 User Manual

Copy operations

Hide thumbs Also See for bizhub C650:

Table of Contents

Replacing toner cartridges and staple cartridges and emptying punch scrap box

Emptying the punch scrap box

If the punch scrap box in the punch kit installed on the finisher becomes full, the message shown below

appears (if the box can be emptied by the user).

The setting for emptying the punch scrap box should be specified by the service representative. For

details, contact the service representative.

The default setting is "Service". If a message appears, immediately contact the service representative.

Screen when a Punch setting is selected