Selecting A Setting For Oversized Paper (Wide Paper Settings) - Konica Minolta Bizhub C353 User Manual

6
Using the keyboard that appears, type in the name of the key, touch [OK], and then touch [Close]. For
details on typing in text, refer to "Entering text" on page 12-3.
7
Touch [OK], and then touch [OK] in the next three screens that appear.
The Basic screen appears again.
6.2.5

Selecting a setting for oversized paper (Wide Paper settings)

By specifying paper one size larger than the document as wide paper, the document can be copied at the
center so that there is no loss of the document image.
Wide paper can be specified for tray 1/2/3/4 or the bypass tray.
!
Detail
Only standard-sized wide paper can be specified for tray 1/2/3/4.
When specifying wide paper for the bypass tray, non-standard-sized paper can be specified. When
using non-standard-sized paper, enter the paper size.
The following procedure describes how to specify the setting for wide paper loaded into the bypass tray.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
6-14
Copy paper/originals
C353/C253/C203