Konica Minolta bizhub C650 User Manual page 449

Utility mode
Left Panel Display Default
Parameter
Left Panel Display Default
Job Display Setting
Search Option Settings
Parameter
Uppercase and Lowercase
Letters
Search Option Screen
Copier Settings
Parameter
Auto Booklet ON when
Fold & Staple
Auto Zoom For Combine/
Booklet
Auto Sort/Group Selection
Default Copy Settings
C650
Description
Select the information displayed as the default in the left
panel.
• Job List:
A list of the jobs that are being performed and queued
to be performed is displayed.
• Check Job Settings:
The currently specified copy settings are displayed.
Select the job list information displayed in the left panel.
• List Display:
A list of the jobs that are being performed and queued
to be performed is displayed.
• Status Display:
The progress of the job being performed is displayed.
Description
Select whether or not to differentiate between uppercase
and lowercase letters.
Select whether or not to display [Uppercase and Lower-
case Letters] setting in the advanced search.
Description
Select whether or not the "Booklet" function is selected au-
tomatically when the "Center Staple & Fold" setting is se-
lected. This parameter is available only if optional Finisher
FS-608 is installed.
Select whether or not the preset zoom ratios are automati-
cally selected when the "Auto" Paper setting is selected
and a combined copy setting or the "Booklet" function is
selected.
• Auto Display Zoom Ratio:
The following zoom ratios are specified.
2in1, Booklet: 64.7%
4in1: 50.0%
8in1: 32.3%
• Off:
The zoom ratio is not selected automatically.
Select whether or not the "Sort" setting is automatically se-
lected when 2 or more copies are set to be printed in a sin-
gle job.
• Yes:
When a document is loaded into the automatic docu-
ment feeder and the [Start] key is pressed, the "Group"
setting is automatically selected if the document con-
sists of only one page, and the "Sort" setting is auto-
matically selected if the document consists of two or
more pages.
• No:
The "Sort" or "Group" setting is not selected automati-
cally.
Specify the default settings for Copy mode.
The copy settings selected when the machine is turned on
(the power switch is set to "n") or the [Reset] key is pressed
can be specified.
• Current Setting:
The settings specified from the touch panel before Util-
ity mode was entered are set as the default settings for
Copy mode.
• Factory Default:
The factory default settings are set as the default set-
tings for Copy mode.
11
Default Setting
Job List
List Display
Default Setting
Differentiate
OFF
Default Setting
Auto Select Booklet
Auto Display Zoom Ratio
Yes
Factory Default
11-18