Konica Minolta bizhub C650 User Manual page 336

Application functions
3
Select the position of the binding margin.
– To cancel the setting and select the default, press the [Reset] key.
– To cancel the "Page Margin" function, touch [No].
– If "Auto" is selected, the binding margin is set at the top or at the left.
– If "Auto" is selected for the binding position, load the document with the top toward the back of the
machine. If the document is loaded in any other orientation, the correct position will not be selected.
What happens when "Auto" is selected?
?
% The factory default setting is "Auto". Touch [Auto] to automatically determine the binding position
according to the orientation of the loaded document. If the document length is 11-11/16 inch or less,
a binding position along the long side of the paper is selected. If the document length is more than
11-11/16 inch, a binding position along the short side of the paper is selected.
4
Touch [-] or [+] to specify the binding margin width.
– If "None" is selected, the binding margin width is set to 0 inch. When making double-sided copies,
the image orientation can adjusted without creating a binding margin.
– If a decimal value is displayed in the screen, use the keypad to type in the setting. For details on
switching between decimal and fraction values, refer to "System Settings" on page 11-15.
– If a decimal value is displayed in the screen and the specified value is outside the allowable range,
the message "Input Error" appears.
Type a value within the allowable range. If the value was incorrectly entered, press the [C] (clear) key
to erase the value, and then specify the correct value.
How can the entered margin position be corrected?
?
% Without changing the margin width, change the margin position.
5
If necessary, touch [Image Shift].
The Image Shift screen appears.
6
Adjust the position of the image, and then touch [OK].
– Touch [Left], [Right], [Top] or [Bottom] to select the direction to be adjusted, and then use the
keypad or touch [-] and [+] to specify the adjustment amount.
– To cancel the shift, touch [No Shift].
C650
7
7-67