Basic copy operations
2
Touch [1-Sided > 2-Sided] or [2-Sided > 2-Sided].
–
Specify the position of the binding margin and the orientation of the loaded document, otherwise
the copies will not be printed as desired.
3
Touch [Binding Position].
–
For a single-sided document, select the binding position for the copy, and then touch [OK].
–
For a double-sided document, select the binding positions for the document and the copy, and then
touch [OK].
–
If the binding position for the document is set to "Auto", the position of the binding margin is
automatically selected. A binding margin along the long side of the paper is selected if the document
length is 11-11/16 inch or less. If the document length is more than
11-11/16 inch, a binding margin along the short side of the paper is selected.
–
If "Auto" is selected under "Original Binding Position", the binding margin is set at the top or at the
left.
C650
2
2-46