Selecting A Setting For Oversized Paper (Wide Paper Settings) - Konica Minolta BIZHUB C203 User Manual

Copy Operations
3.21.5
bizhub C353/C253/C203 (FE2)
Downloaded From ManualsPrinter.com Manuals

Selecting a setting for oversized paper (Wide Paper settings)

By specifying paper one size larger than the document as wide paper, the document can be copied at the
center so that there is no loss of the document image.
Wide paper can be specified for tray 1/2/3/4 or the bypass tray.
The following procedure describes how to specify the setting for wide paper loaded into the bypass tray.
!
Detail
Only standard-sized wide paper can be specified for tray 1/2/3/4.
When specifying wide paper for the bypass tray, non-standard-sized paper can be specified. When
using non-standard-sized paper, enter the paper size.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
2
Touch the button for the bypass tray.
– To set the paper size for tray 1/2/3/4, touch the button for the corresponding paper tray.
3
Touch [Change Tray Settings].
3
3-103