Utility mode
Adjusting printing according to the media
The print image can be adjusted for each type of paper that is used.
1
Display the Administrator Setting screen.
–
For details on displaying the Administrator Setting screen, refer to "Displaying the Administrator
Settings screen" on page 11-36.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [2 Printer Adjustment].
The Printer Adjustment screen appears.
5
Touch [5 Media Adjustment].
The Media Adjustment screen appears.
6
Touch the button for the paper type to be set.
–
If the image is distorted with single-sided copying, select a paper type below "Font".
–
If the image on the back side is distorted with double-sided copying, select a paper type below
"Back".
7
Touch [+] or [–] to adjust the setting between –8 and +7. An adjustment is possible if the size of the white
areas in missing print or the white spots is 0.5 mm or less.
–
For missing print or white spots in the print image,
touch [–] to reduce the adjustment.
C650
11
11-47