Konica Minolta bizhub C650 User Manual page 84

Basic copy operations
– To specify a standard size, touch the button for the desired document size.
– To specify a custom size, touch [Custom Size] to display the Custom Size screen. Specify the X and
Y sides of the paper, and then touch [OK].
– Touch [X] or [Y], touch [<->] to switch between the integer and the fraction, and then touch [-] and
[+] to specify the size of the paper.
– If a decimal value is displayed in the Custom Size screen, use the keypad to type in the setting. For
details on switching between decimal and fraction values, refer to "System Settings" on
page 11-15.
– If a decimal value is displayed in the screen and the specified value is outside the allowable range,
the message "Input Error" appears. Type a value within the allowable range. If the value was
incorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value.
– To cancel changes to the settings, touch [Cancel].
– To specify a photo size, touch [Photo Size] to display the Photo Size screen. Touch the button for
the desired document size, and then touch [OK].
The Original Size screen appears again.
C650
Original Size screen
Custom Size screen
Photo Size screen
2
2-17