Loading Paper Into Tray 3 - Konica Minolta bizhub C650 User Manual

Before making copies
1.5

Loading paper into tray 3

1
Pull out tray 3.
2
Lift up the paper take-up roller, and then load the paper
into the tray.
– Load the paper into the tray so that the side of the
paper to be printed on (the side facing up when the
package was unwrapped) faces up.
– Load letterhead paper so that the side to be printed
on faces down.
? How is curled paper loaded?
% Flatten the paper before loading it.
How many sheets of paper and other media can be
?
loaded?
% Do not load so many sheets of plain paper that the top
of the stack is higher than the , mark.
3
Lower the paper take-up roller, and then close tray 3.
Reminder
For details on selecting the size and type of paper loaded in tray 3, refer to "Copy paper" on page 6-2.
Do not load tray 3 with paper of a size other than that previously specified.
Be careful not to touch the surface of the paper take-up roller with your hands.
Note
To change the size of paper loaded in tray 3, contact your service representative.
To print on OHP transparencies and envelopes, use the bypass tray.
C650
D C B A
1
1-40