Konica Minolta bizhub C650 User Manual page 493

Utility mode
8
Check the distance from the reference black lines to the cyan lines in the test pattern along the X and
Y directions.
– If the lines are shifted in the X direction as shown below, touch [-] under "X" to reduce the
adjustment (between -1 dot and -6 dots).
– Each time [+] or [-] is touched, the value is increased or decreased by one increment.
– If the lines are shifted in the X direction as shown below, touch [+] under "X" to increase the
adjustment (between 1 dot and 6 dots).
– If the lines are shifted in the Y direction as shown below, touch [-] under "Y" to reduce the
adjustment (between -1 dot and -6 dots).
C650
Y
X
11
11-62