Oil And Filter Inspection - Toyota T100 1996 Service Manual

Recommended Viscosity (SAE):
10W−30
5W−30 PREFERRED
°F −20 0 20 40
°C −29 −18 −7 4
TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE
1996 TOYOTA T100 (RM449U)
LUBRICATION (3RZ−FE)
OIL AND FILTER
INSPECTION
1.
Check the oil for deterioration, entry of water, discoloring or thin-
ning.
60 80 100
If the quality is visibly poor, replace the oil.
16 27 38
B00319
2.
The oil level should be between the "L" and "F" marks on the dip-
stick.
If low, check for leakage and add oil up to "F" mark.
NOTICE:
S
S
S
3.
− OIL AND FILTER
CHECK ENGINE OIL QUALITY
Oil grade:
API grade SH Energy−Conserving II or SJ,
Energy−Conserving or ILSAC multigrade engine oil.
SAE 5W−30 is the bset choise for your vehicle, for
good fuel economy, and good starting in cold
weather.
CHECK ENGINE OIL LEVEL
Do not fill with engine oil above the "F" mark.
When inserting the dipstick, insert the curved tip of
the dipstick facing the same direction as the curve of
the guide.
If the dipstick gets caught while inserting it, do not
force it in. Reconfirm the direction of the dipstick.
REMOVE ENGINE UNDER COVER
Author :
LU−1
LU0O7−01
Date : 1109