AT−32
1996 TOYOTA T100 (RM449U)
AUTOMATIC TRANSMISSION
INSTALLATION
1.
Using calipers and a straight edge, measure the distance from
the installed surface of the transmission housing to the installed
surface of the torque converter clutch.
D00842
2.
Installation is in the reverse order of removal (See page
AT−28).
HINT:
S
S
−
AUTOMATIC TRANSMISSION UNIT (A340E)
CHECK TORQUE CONVERTER CLUTCH INSTALLA-
TION
Correct distance:
More than 31.75 mm (1.2500 in.) for 3RZ−FE
More than 17.95 mm (0.7067 in.) for 5VZ−FE
INSTALL TRANSMISSION
After installation, adjust the shift lever position (See page
DI−265).
Fill ATF and check the fluid level (See page DI−265).
AT02C−01