Toyota T100 1996 Service Manual page 1263

CL−4
No continuity
No continuity
No continuity
1996 TOYOTA T100 (RM449U)
Z17110
Z17111
Z17112
Continuity
CL0363
No continuity
CL0364
CLUTCH − CLUTCH PEDAL
8. CHECK CONTINUITY OF CLUTCH START CANCEL
SWITCH
(a) Check that there is no continuity when connecting the
positive (+) lead from the ohmmeter to terminal 2 and the
negative (−) lead to terminal 1.
(b) Check that there is no continuity when connecting the
positive (+) lead from the ohmmeter to terminal 3 and the
negative (−) lead to terminal 1.
(c) Check the there is no continuity between terminals 2 and
3.
If continuity is not as specified, replace the clutch start cancel
switch.
9. CHECK OPERATION OF CLUTCH START CANCEL
SWITCH
(a) Connect positive (+) lead from the battery to terminal 3
and connect negative (−) lead to terminal 1.
(b) Check that there is no continuity when connecting the
positive (+) lead from the ohmmeter to terminal 2 and the
negative (−) lead to terminal 1.
(c) When pushing the switch, check that the indicator light
connect on and there is continuity between terminal 1 and
2.
(d) Check that there is no continuity between terminals 1 and
2 when disconnect the battery lead.
If continuity is not as specified, replace the clutch start cancel
switch.
Author :
1239
Date :