Vsv For Fuel Pressure Control Inspection - Toyota T100 1996 Service Manual

1996 TOYOTA T100 (RM449U)
SFI (5VZ−FE) − VSV FOR FUEL PRESSURE CONTROL
VSV FOR FUEL PRESSURE
CONTROL
INSPECTION
1. REMOVE VSV
(a) w/ EGR:
Disconnect the 2 connectors and 4 vacuum hoses, and
remove the 2 bolts and VSV.
(b) w/o EGR:
Disconnect the connector and 2 vacuum hoses, and re-
move the 2 bolts and VSV.
2. INSPECT VSV FOR OPEN CIRCUIT
Using an ohmmeter, check that there is continuity between the
terminals.
Resistance: 33 − 39 Ω at 20 °C(69 °F)
If there is no continuity, replace the VSV.
3. INSPECT VSV FOR GROUND
Using an ohmmeter, check that there is no continuity between
each terminal and the body.
If there is continuity, replace the VSV.
4. INSPECT VSV FOR OPERATION
(a) Check that air flows from port E to port G.
Author :
SF−47
SF1QQ−01
Date : 1053