Generator Removal - Toyota T100 1996 Service Manual

Pivot Bolt
1996 TOYOTA T100 (RM449U)
CHARGING (3RZ−FE)
REMOVAL
Adjust Bolt
1.
(a)
(b)
2.
(a)
(b)
(c)
Lock Bolt
P14842
(d)
P14830
− GENERATOR
REMOVE DRIVE BELT
Loosen the lock bolt, pivot bolt, nut and adjusting bolt.
Remove the drive belt.
REMOVE GENERATOR
Disconnect the generator connector.
Remove the nut, and disconnect the generator wire.
Disconnect the wire harness with the clip.
Remove the lock bolt, pivot bolt, nut and generator.
Torque:
Pivot bolt: 59 N·m (600 kgf·cm, 43 ft·lbf)
Lock bolt: 29 N·m (300 kgf·cm, 21 ft·lbf)
CH−7
CH02D−03