Starter Relay - Toyota T100 1996 Service Manual

ST−16
Continuity
Continuity
Ohmmeter
1996 TOYOTA T100 (RM449U)
STARTING (5VZ−FE)
No continuity
P02536
Battery
P02537
−

STARTER RELAY

STARTER RELAY
INSPECTION
1. REMOVE STARTER RELAY (Marking: "ST")
LOCATION: The relay is located in the No.1 junction block on
the driver's side.
2. INSPECT STARTER RELAY CONTINUITY
(a) Using an ohmmeter, check that there is continuity be-
tween terminals 1 and 2.
If there is no continuity, replace the relay.
(b) Check that there is no continuity between terminals 3 and
5.
If there is continuity, replace the relay.
3. INSPECT STARTER RELAY OPERATION
(a) Apply battery voltage across terminals 1 and 2.
(b) Using an ohmmeter, check that there is continuity be-
tween terminals 3 and 5.
If there is no continuity, replace the relay.
4. REINSTALL STARTER RELAY
Author :
ST03E−03
1202
Date :