Extension Housing And Transfer Adaptor Replacement - Toyota T100 1996 Service Manual

MANUAL TRANSMISSION (R150, R150F)
1996 TOYOTA T100 (RM449U)
−
REPLACEMENT
1. IF NECESSARY, REPLACE REVERSE RESTRICT PIN
(a) Remove the reverse restrict pin.
(1)
(2)
(3)
(b) Inspect the reverse restrict pin.
Q04410
Turn and push the reverse restrict pin by hand.
Check for smooth operation.
(c) Install the reverse restrict pin.
(1)
(2)
(3)
Sealant:
Part No. 08833 − 00080, THREE BOND 1344, LOCTITE
242 or equivalent
Z03582
(4)
Torque: 19 N·m (190 kgf·cm, 14 ft·lbf)
2. 2WD:
IF NECESSARY, REPLACE EXTENSION HOUSING
OIL SEAL
(a) Remove the dust deflector.
(b) Using a screwdriver, pry out the oil seal.
SST
(c) Using SST and a hammer, drive in a new oil seal.
SST
Drive in depth: 0 ± 0.5 mm (0 ± 0.020 in.)
Q07365
(d) Install the deflector.
EXTENSION HOUSING AND TRANSFER ADAPTOR
Using a torx socket wrench (T40), remove the screw
plug.
Using a pin punch and hammer, drive out the slotted
spring pin.
Remove the reverse restrict pin.
Install the reverse restrict pin to the extension hous-
ing or transfer adaptor.
Using a pin punch and hammer, drive in the slotted
spring pin, as shown.
Apply sealant to the plug threads.
Using a torx socket wrench (T40), install and torque
the screw plug.
09950−60010 (09951−00570), 09950−70010
(09951−07150)
MT−43
MT057−01