Toyota T100 1996 Service Manual page 1067

SF−48
1996 TOYOTA T100 (RM449U)
SFI (5VZ−FE) − VSV FOR FUEL PRESSURE CONTROL
(b) Apply battery positive voltage across the terminals.
(c) Check that air flows from port E to the filter.
If operation is not as specified, replace the VSV.
5. REINSTALL VSV
(a) Install the VSV with the 2 bolts.
Torque: 8 N·m (80 kgf·cm, 71 in.·lbf)
(b) w/ EGR:
Connect the 2 connectors and 4 vacuum hoses to the 2
VSV.
(c) w/o EGR:
Connect the connector and 2 vacuum hoses to the VSV.
Author : Date :
1054