Toyota T100 1996 Service Manual page 1418

TR−10
M/T:
A/T:
TF0459
TF0619
1996 TOYOTA T100 (RM449U)
TRANSFER − TRANSFER ASSEMBLY
13. REMOVE STRAIGHT SCREW PLUGS, SPRINGS AND
LOCKING BALLS
(a) Using a hexagon wrench, remove the 2 straight screw
plugs.
Torque: 19 N·m (190 kgf·cm, 14 ft·lbf)
HINT:
At the time of installation, apply liquid sealer to the plugs.
Sealant:
Part No.08833−00080, THREE BOND 1344,
TF0457
LOCTITE 242 or equivalent
(b) Using a magnetic finger, remove the spring and ball from
the both holes.
TF0458
14. REMOVE FRONT DRIVE FORK SHAFT, FORK,
SPRING AND STOPPER
(a) Using a pin punch and hammer, drive out the 2 slotted
spring pins.
HINT:
When the pin is removed from the front drive fork shaft, the shaft
will spring loose if the pin punch is removed, so keep the pin
punch inserted in the shaft hole.
F03415