Toyota T100 1996 Service Manual page 1446

TR−38
1996 TOYOTA T100 (RM449U)
TRANSFER − OIL SEAL
(b) Using SST and a hammer, drive in a new oil seal until its
surface is flush with the housing upper surface.
SST
(c) Coat the lip of the oil seal with MP grease.
TF0505
4. REPLACE FRONT AND REAR COMPANION FLANGE
OIL SEALS
(a) Using a screwdriver and hammer, drive out the oil seals
from the 2 flanges.
TF0506
(b) Using a socket wrench and hammer, drive in a new oil
seal.
(c) Coat the lip of the oil seal with MP grease.
TF0530
5. A/T:
REPLACE SHIFT FORK SHAFT OIL SEALS
(a) Using a screwdriver, pry out the oil seal.
TF0631
(b) Using SST and a hammer, drive in a new oil seal.
SST
Oil seal depth: −0.5 − 0.5 mm (−0.020 − 0.020 in.)
TF0630
09550−00032, 09550−10012 (09252−10010)
09304−12012