Toyota T100 1996 Service Manual page 1296

MT−16
MANUAL TRANSMISSION (R150, R150F)
1996 TOYOTA T100 (RM449U)
− MANUAL TRANSMISSION ASSEMBLY
17. REMOVE SHIFT FORK SHAFT NO.2 AND SHIFT FORK
NO.2
(a) Pull out the shift fork shaft No.2 from the shift forks No.1,
No.2 and intermediate plate.
(b) Remove the shift fork No.2 from the groove of hub sleeve
No.2.
(c) Using a magnetic finger, remove the interlock pin from the
intermediate plate.
Q06766
18. REMOVE SHIFT FORK SHAFT NO.1 AND SHIFT FORK
NO.1
(a) Pull out the shift fork shaft No.1 with the straight pin from
the shift fork No.1 and intermediate plate.
(b) Remove the shift fork No.1 from the groove of reverse
gear.
(c) Using a magnetic finger, remove the interlock pin from the
intermediate plate.
Q06763
19. REMOVE SHIFT FORK SHAFT NO.3 AND SHIFT FORK
NO.3
(a) Pull out the shift fork shaft No.3 from the shift fork No.3,
reverse shift fork and intermediate plate.
(b) Remove the shift fork No.3 from the groove of hub sleeve
No.3.
(c) Using a magnetic finger, remove the interlock pin from the
intermediate plate.
Q06768
20. REMOVE SHIFT FORK SHAFT NO.4
(a) Using a magnetic finger, remove the ball.
(b) Pull out the shift fork shaft No.4 from the reverse shift fork
and intermediate plate.
NOTICE:
Take care of the ball in the reverse shift fork. It will spring
out when you pull out the shift fork shaft No.4.
(c) Using a magnetic finger, remove the spring from the re-
verse shift fork.
Q06904
21. REMOVE REVERSE SHIFT FORK AND ARM
(a) Remove the reverse shift fork and arm.
HINT:
At the time of reassembly, please refer to the following item.
Align the reverse shift arm to the pivot of the reverse shift arm
bracket.
(b) Using a screwdriver, remove the E−ring.
(c) Separate the reverse shift fork and arm.
Q06771