Speedometer Driven Gear On-Vehicle Repair - Toyota T100 1996 Service Manual

AT−8
A340E
A340F
A340E
A340F
1996 TOYOTA T100 (RM449U)
AUTOMATIC TRANSMISSION
SPEEDOMETER DRIVEN GEAR
ON−VEHICLE REPAIR
1.
(a)
(b)
Q04730
(c)
(d)
(e)
Q06873
2.
SST
Using SST, remove the oil seal.
SST
Z15613
3.
SST
Using SST, install a new oil seal.
4.
SST
(a)
(b)
Q07623
(c)
(d)
(e)
− SPEEDOMETER DRIVEN GEAR
DISCONNECT SPEEDOMETER CABLE AND RE-
MOVE SPEEDOMETER DRIVEN GEAR
Loosen the serrated collar with pliers. Do not lose the felt
dust protector and washer.
Disconnect the speedometer cable.
Remove the bolt and locking plate. Pry out the speedom-
eter driven gear assembly.
Remove the O−ring from the speedometer drive gear as-
sembly.
Remove the clip and speedometer driven gear from the
speedometer driven gear sleeve.
REMOVE SPEEDOMETER DRIVEN GEAR OIL SEAL
SST 09921−00010
INSTALL SPEEDOMETER DRIVEN GEAR OIL SEAL
SST 09201−10000 (09201−01080)
Drive in depth: 20 mm (0.79 in.)
INSTALL SPEEDOMETER DRIVEN GEAR AND CON-
NECT SPEEDOMETER CABLE
Install the clip and speedometer driven gear to the
speedometer driven gear sleeve.
Install a new O−ring to the speedometer driven gear as-
sembly.
Install the speedometer driven gear.
Install the locking plate with the bolt.
Torque: 16 N·m (160 kgf·cm, 12 ft·lbf)
Connect the speedometer cable.
Author :
AT01W−02
1349
Date :