Toyota T100 1996 Service Manual page 1358

1996 TOYOTA T100 (RM449U)
MANUAL TRANSMISSION (W59)
5.
(a)
(b)
Q04038
(c)
If it does not lock, replace the synchronizer ring.
Q04011
6.
Using a feeler gauge, measure the clearance between the hub
sleeves and shift forks.
If the clearance exceeds the maximum, replace the shift fork or
hub sleeve.
WM0066
− COUNTER GEAR AND REVERSE IDLER GEAR
INSPECT 5TH GEAR SYNCHRONIZER RING
Check for wear or damage.
Install the synchronizer pull ring, cone ring and outer ring
to the 5th gear.
Check the braking effect of the synchronizer ring. Turn the
synchronizer ring in one direction while pushing it to the
gear cone. Check that the ring locks.
INSPECT SHIFT FORK AND HUB SLEEVE CLEAR-
ANCE
Maximum clearance: 1.0 mm (0.039 in.)
MT−33