Replacing Crypto Accelerator Modules On J4350 And J6350 Routers - Juniper J-series Services Router J2350 Hardware Manual

8.
9.

Replacing Crypto Accelerator Modules on J4350 and J6350 Routers

The Crypto Accelerator Module is a processor card that enhances performance of
cryptographic algorithms used in IP security (IPSec) services. The Crypto Module is
a standard feature on J6350 Services Routers and an optional feature on the J4350
Services Routers.
Figure 84 on page 150 shows the location of the Crypto Accelerator Module.
Press and release the power button to power on the router. Verify that the
LED lights steadily.
Verify that the Crypto Module is correctly installed by issuing the
command, as shown in the following example:
hardware
user@host> show chassis hardware
user@host> show chassis hardware
Hardware inventory:
Item Version
Chassis
Midplane REV 00
System IO REV 00
Crypto Module
Acceleration
Routing Engine REV 00
FPC 0
PIC 0
Power Supply 0
If appears in the output, the Crypto Accelerator Module is installed
Crypto Module
correctly.
Replacing Crypto Accelerator Modules on J4350 and J6350 Routers
Chapter 8: Replacing Hardware Components
Part number Serial number
JN1086AA8ADA
710-012339 NE0664
710-012315 NE3564
710-012149
POWER
show chassis
Description
J4350
JX350 System IO
Crypto
RE-J4350-2540
FPC
4x GE Base PIC
149