Installing J4350 And J6350 Routers - Juniper J-series Services Router J2350 Hardware Manual

JUNOS Software with Enhanced Services Hardware Guide
3.
Figure 43: Hanging a J2320 Router in a Rack
Figure 44: Hanging a J2350 Router in a Rack
4.
5.
6.

Installing J4350 and J6350 Routers

WARNING: DC-powered Services Routers are intended for installation only in a
restricted access location.
80
Installing J4350 and J6350 Routers
Align the top hole in each mounting bracket with a hole in each rack rail as shown
in Figure 43 on page 80 and Figure 44 on page 80, making sure the chassis is
level.
Have a second person install a mounting screw into each of the two aligned
holes. With a number 2 Phillips screwdriver, tighten the screws.
Verify that the mounting screw on one side of the rack is aligned with the
mounting screw on the opposite side and that the router is level.
Install the second screw in each mounting bracket.