Juniper J-series Services Router J2350 Hardware Manual page 30

JUNOS Software with Enhanced Services Hardware Guide
J6350 Services Router Overview
The J6350 Services Router is designed primarily for regional and central offices. It
has a chassis that is 2 U (rack units) in size with an optional redundant AC or DC
power supply, up to 2 GB of memory, and two universal serial bus (USB) ports for
external storage. The J6350 Services Router is a higher-performance system than
the J4350 Services Router.
J6350 routers come standard with 1 GB of memory and can be upgraded to 2 GB of
memory. For instructions on adding memory, see "Replacing DRAM
Modules" on page 136.
Each J6350 chassis contains four built-in Gigabit Ethernet ports with link speeds of
10/100/1000 Mbps over a copper interface, and six slots for field-replaceable Physical
Interface Modules (PIMs). Four of the six slots (slots 2, 3, 5, and 6) support high-speed
interfaces (ePIMs).
The J6350 Services Router supports the following field-replaceable PIMs and modules:
6
J6350 Services Router Overview
G.SHDSL PIM (2 ports)
WXC Integrated Services Module
Gigabit Ethernet uPIM (1–port, 6-port, 8-port, and 16-port)
SFP Gigabit Ethernet ePIM (1 port)
Copper Gigabit Ethernet ePIM (1 port)
Dual-Port E1 PIM
Dual-Port T1 PIM
E3 PIM (1 port)
DS3 (T3) PIM (1 port)
Dual-Port Fast Ethernet PIM
Dual-Port Channelized T1/E1/ISDN PRI PIM
4-port Fast Ethernet ePIM
4-port ISDN BRI S/T or U PIM
Dual-Port Serial PIM
ADSL 2/2+ Annex A PIM (1 port)
ADSL 2/2+ Annex B PIM (1 port)
G.SHDSL PIM (2 ports)
WXC Integrated Services Module