Using The Junos Software With Enhanced Services Configuration Wizard - Juniper J-series Services Router J2350 Hardware Manual

Using the JUNOS Software with Enhanced Services Configuration Wizard

Before you use the CLI configuration wizard, log in to the Services Router console as
described in "Connecting to the CLI Locally" on page 98 or "Connecting to the CLI
Remotely" on page 100
To invoke the configuration wizard, enter
you invoke the wizard, it presents the following series of prompts. Follow the prompts
as described in Table 43 on page 107.
Table 43: Basic Configuration Wizard Summary
Prompt
Identification
Enter host name:
Please enter root password:
Retype root password:
Would you like to configure a domain name? [yes,
no] (no):
If you enter y(es), the configuration wizard
presents the following prompt.
Enter domain name:
config-wizard
Function
Defines the hostname of the router.
Sets the root password that user "root"
can use to log into the router.
Verifies that the root password has
been typed correctly.
Defines the network or subnetwork
that the machine belongs to.
Configuring Basic Settings Using the CLI Configuration Wizard
Chapter 6: Establishing Basic Connectivity
at the console prompt. After
Your Action
Type the hostname.
Alphanumeric, hyphen, and
underline characters are allowed.
Type a plain-text password that
the system encrypts.
NOTE: After a root password has
been defined, it is required when
you log into the J-Web user
interface or the CLI.
Retype the password.
Type the domain name.
Alphanumeric, hyphen, period,
and underline characters are
allowed.
107