Juniper J-series Services Router J2350 Hardware Manual page 52

JUNOS Software with Enhanced Services Hardware Guide
off and on again, we recommend waiting a few seconds between shutting it down
and powering it back up. Table 13 on page 28 describes the
Table 13: STATUS LED
Color
Green
Red
ALARM LED
The
or maintenance and lights red to indicate a major condition that can result in a system
shutdown. When the condition is corrected, the light turns off. Table 14 on page 28
describes the
Table 14: ALARM LED
Color
Red
Yellow
Unlit
For information about alarm conditions and corrective actions, see "Monitoring and
Correcting Chassis Alarm Conditions" on page 157. For additional information, see
the JUNOS Software Administration Guide.
28
J4350 and J6350 Services Router Hardware Features
State
Blinking
On steadily
Blinking
ALARM LED lights yellow to indicate a minor condition that requires monitoring
LED.
ALARM
State
On steadily
On steadily
Off
Description
Router is starting up or performing diagnostics.
Router is operating normally.
Error has been detected.
Description
Major alarm indicates a critical situation on the router that
has resulted from one of the following conditions. A red
alarm condition requires immediate action:
One or more hardware components have failed.
One or more hardware components have exceeded
temperature thresholds.
An alarm condition configured on an interface has
triggered a critical warning.
Minor alarm condition requires monitoring or maintenance:
Indicates a noncritical condition on the router that, if
left unchecked, might cause an interruption in service
or degradation in performance.
A missing rescue configuration or software license
generates a yellow system alarm.
No alarms.
LED.
STATUS