Juniper J-series Services Router J2350 Hardware Manual page 136

JUNOS Software with Enhanced Services Hardware Guide
Table 45: Configuring Basic Settings (continued)
Task
Allow SSH remote access.
Define root authentication
for access to the router.
NOTE: For readability, the
entire key is not shown.
Define the time zone the
router is located in.
Define the NTP server that
NTP requests can be sent
to.
Define the DNS server that
receives DNS requests.
Add each domain that the
router belongs to.
112
Configuring Basic Settings with a Configuration Editor
J-Web Configuration Editor
1. In the Nested configuration section, next to Services,
click Configure or Edit.
2. Next to Ssh, click Configure or Edit.
3. Click OK.
4. Click OK a second time to return to the System level
in the configuration editor hierarchy.
1. In the Nested configuration section, next to Root
authentication, click Configure or Edit.
2. Next to Ssh rsa, click Add New Entry.
3. In the Authorized key box, type the RSA password—for
example,
ssh-rsa AAAAB3Nza...D9Y2gXF9ac==
root@routera.lab.router.net
4. Click OK.
5. Click OK a second time to return to the System level
in the configuration editor hierarchy.
In the Time zone list, select the time zone for your
router—for example, America/Los_Angeles.
1. In the Nested configuration section, next to Ntp, click
Configure or Edit.
2. Next to Server, click Add New Entry.
3. In the Address box, type the NTP server's IP
address—for example,
10.148.2.21
4. Click OK.
5. Click OK a second time to return to the System level
in the configuration editor hierarchy.
1. Next to Name server, click Add New Entry.
2. In the Address box, type the address of the DNS
server—for example, 10.148.2.32
3. Click OK.
1. Next to Domain search, click Add New Entry.
2. In the Value box, type the name of the domain in
which the router is located—for example,
3. Click OK.
4. Next to Domain search, click Add New Entry.
5. In the Value box, type the name of another domain
that the router belongs to—for example,
6. Click OK.
CLI Configuration Editor
Set remote access for SSH:
set services ssh
Set the root password. For
example:
set root-authentication ssh-rsa
"ssh-rsa
AAAAB3Nza...D9Y2gXF9ac==
root@routera.lab.router.net"
Set the time zone. For example:
set time-zone America/Los_Angeles
Set the address of the NTP server.
For example:
set ntp server 10.148.2.21
Set the address of the DNS server.
For example:
.
set name-server 10.148.2.32
Set the domains to be searched.
For example:
lab.router.net .
set domain-search lab.router.net
set domain-search router.net
router.net .