Juniper J-series Services Router J2350 Hardware Manual page 81

Figure 38: ADSL 2/2+ Annex A PIM
Figure 39: ADSL 2/2+ Annex B PIM
The ADSL PIM provides the following key features:
For pinouts of cable connectors for ADSL PIMs, see "ADSL and G.SHDSL RJ-11
Connector Pinout" on page 194.
To install or remove a PIM, see "Replacing a PIM" on page 120.
The ADSL PIMs have two LEDs to indicate the status of the PIM and its port.
Table 32 on page 57 describes the meaning of the LED states.
Table 32: LEDs for ADSL PIMs
Label Color
Green
ONLINE
Unlit
Green
STATUS
Red
Onboard network processor
ADSL, ADSL2, and ADSL2+ protocols on the same PIM
"Dying gasp" notification
Asynchronous Transfer Mode (ATM) Adaptation Layer 5 (AAL5) encapsulation
State
On steadily
Off
On steadily
On steadily
Chapter 3: PIM Overview
Description
PIM passed the self-test and is online and
operational.
PIM is offline.
Online with no alarms or failures.
Active with local or remote alarms. The router
has detected a failure.
Field-Replaceable PIMs
57