Juniper J-series Services Router J2350 Hardware Manual page 152

JUNOS Software with Enhanced Services Hardware Guide
Figure 65: Removing the J2320 or J2350 Internal Compact Flash
9.
10.
Figure 66: Inserting the J2320 or J2350 Internal Compact Flash
11.
12.
13.
14.
15.
16.
128
Replacing Internal Compact Flashes on J2320 and J2350 Routers
Place the compact flash on the antistatic mat or in the electrostatic bag.
With the vendor name and memory size facing up and the arrow pointing towards
the router, insert the new compact flash into the compact flash slot (see
Figure 66 on page 128).
Replace the compact flash slot cover.
Tighten the pan head screws that secure the compact flash slot cover.
Slide the chassis cover onto the chassis.
Replace the chassis cover. (See "Removing and Replacing the Chassis Cover on
J2320 and J2350 Routers" on page 124.)
Replace the power cable.
Press and release the power button to power on the router. Verify that the
LED lights steadily.
POWER