Reset Config Button; Built-In Gigabit Ethernet Ports - Juniper J-series Services Router J2350 Hardware Manual

HA LED
The HA (high availability) LED is located in the front panel near the power status LED
of the LED dashboard. The LED lights when the router starts, but otherwise remains
unlit.Table 15 on page 29 describes the HA LED.
Table 15: HA LED
Color State
Green On steadily
Red On steadily
Amber On steadily
Unlit Off

RESET CONFIG Button

Use the
or to the factory default configuration, or a rescue configuration. The button is
recessed to prevent it from being pressed accidentally. For details about the
CONFIG
Inaccessible" on page 160.

Built-In Gigabit Ethernet Ports

Four built-in Gigabit Ethernet ports provide LAN connections over copper interfaces
to hubs, switches, local servers, and workstations. You can also designate an Ethernet
port for management traffic. When configuring one of these ports, you use the
interface name that corresponds to the port s location. From left to right on the front
panel, the interface names for the ports are
ge-0/0/3
For Gigabit Ethernet port pinout information, see "Gigabit Ethernet ePIM RJ-45
Connector Pinout" on page 190.
Each port has two LEDs, a
side. Table 16 on page 29 describes the built-in Ethernet port LEDs.
Table 16: Gigabit Ethernet Port LEDs
Function Color
Green
LINK
Unlit
Description
All cluster members and monitored links are available.
A cluster member is missing or unreachable, or the other node is no longer part of
a cluster because it has been disabled by the dual membership and detection
recovery process in reaction to a control link or fabric link failure.
All cluster members are present, but one or more monitored links are down.
The node is not configured for clustering or it has been disabled by the dual
membership and detection recovery process in reaction to a control link or fabric
link failure.
button to return the router to a previous valid configuration
RESET CONFIG
button, see "Resetting the Configuration File When the Router Is
.
TX/RX
State
On steadily
Off
J4350 and J6350 Services Router Hardware Features
Chapter 2: J-series Services Router Hardware Features
ge-0/0/0 , ge-0/0/1
LED on the left side and a
Description
Port is online.
Port is offline.
RESET
, ge-0/0/2 , and
LED on the right
LINK
29