Installing The Handlebar; Installing The Handlebar Grips - Yamaha YFM250RX 2008 Service Manual

STEERING SYSTEM
EBS00449

INSTALLING THE HANDLEBAR

1. Install:
• handlebar
• handlebar holders
Handleber holder
20 Nm (2.0 m•kg, 15 ft•lb)
NOTE: NOTE:
• Install the handlebar horizontally shown in the
illustration.
• The upper handlebar holder should be
installed with the punched mark
.
CAUTION:
First tighten the bolt
the handlebar holder, and then tighten the
bolt on the rear side.
EBS00450

INSTALLING THE HANDLEBAR GRIPS

1. Install:
• handlebar grips
NOTE: NOTE:
• Before applying the adhesive, wipe off grease
or oil on the handlebar surface
quer thinner.
• Install the handlebar grips so that the "L"
arrow on the left grip and "R" arrow on the
right grip are placed vertically.
6-45
CHAS
forward
on the front side of
with a lac-