Installing The Pickup Coil Rotor - Yamaha YFM250RX 2008 Service Manual

PICKUP COIL ROTOR AND STARTER CLUTCH

INSTALLING THE PICKUP COIL ROTOR

1. Install:
• Washer
• Bearing
• Starter wheel gear
• Starter idle gear 2
2. Install:
• Woodruff key
• Pickup coil rotor
• Washer
• Pickup coil rotor bolt
NOTE: NOTE:
• Clean the tapered portion of the crankshaft
and the rotor hub.
• When installing the rotor, make sure the woo-
druff key is properly seated in the key way of
the crankshaft.
3. Tighten:
• Pickup coil rotor bolt
Pickup coil rotor bolt
60 Nm (6.0 m•kg, 44 ft•lb)
NOTE: NOTE:
• Tighten the pickup coil rotor bolt
holding the rotor with a sheave holder
• Do not allow the sheave holder to touch the
projection on the rotor
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
4-64
ENG
while
.
.