Yamaha YFM250RX 2008 Service Manual page 58

Install the indicator light as shown in the illustra-
tion.
Place the coupler joint above the front fender.
Route the front brake light switch lead and throttle
cable through the guide.
Connect the main switch lead on top of the front
fender.
Route both leads from the front.
Route the headlight lead under the frame.
To the front fender
To the front panel
J
J
CABLE ROUTING
To the handlebar
Route the air vent hose through the bracket.
Route the battery negative lead behind the clutch
cable holder.
Fix point for wire harness
Insert the air vent hose into the fender.
Route the clutch switch lead and handlebar switch
lead on the box shaped part.
Connect the clutch switch lead and handlebar
switch lead on top of the front fender.
Route the wire harness from the front.
K
K
2-35
SPEC
K-K
J-J