FRONT AND REAR WHEELS
EBS00390
INSTALLING THE WHEEL HUBS
1. Install:
• front axle nuts
Front axle nut
• rear axle nuts
Rear axle nut
• cotter pins
NOTE:
NOTE:
• Do not loosen the axle nut after torquing it. If
the axle nut groove is not aligned with the cot-
ter pin hole, align the groove with the hole by
tightening the axle nut.
• Bend the longer cotter pin up.
6-7
CHAS
70 Nm (7.0 m•kg, 52 ft•lb)
120 Nm (12.0 m•kg, 89 ft•lb)