Installing The Exhaust Pipe And Muffler - Yamaha YFM250RX 2008 Service Manual

ENGINE REMOVAL
INSTALLING THE EXHAUST PIPE AND
MUFFLER
1. Install:
• gasket
(to muffler)
Installed depth of gasket
3.5 mm (0.14 in)
2. Install:
• exhaust pipe protector
3. Tighten:
• exhaust pipe protector screws
Screw
8 Nm (0.8 m•kg, 5.9 ft•lb)
LOCTITE
4. Install:
• gasket
• exhaust pipe
5. Tighten:
• nuts (exhaust pipe)
Exhaust pipe nut
18 Nm (1.8 m•kg, 13 ft•lb)
6. Install:
• clamp
NOTE: NOTE:
Slide the clamp onto the end of the muffler and
insert the projection
in the muffler. Tighten the clamp after
installing the muffler.
4-2
ENG
®
of the clamp into a slot