STEERING SYSTEM
EBS00447
REMOVING THE HANDLEBAR GRIPS
1. Remove:
• handlebar grips 1
NOTE:
_
Blow compressed air between the handlebar
and handlebar grip, and gradually push the
grip off the handlebar.
EBS00448
CHECKING THE HANDLEBAR
1. Check:
• handlebar
Bends/cracks/damage → Replace.
WARNING
_
Do not attempt to straighten a bent handle-
bar as this may dangerously weaken the
handlebar.
EBS00449
INSTALLING THE HANDLEBAR
1. Install:
• handlebar
• handlebar holders
NOTE:
_
• Install the handlebar within 15° from the hori-
zontal line shown in the illustration.
• The upper handlebar holders should be
installed with the punched mark 1 forward
2.
CAUTION:
_
First tighten the bolts 3 on the front side of
the handlebar holders, and then tighten the
bolts 4 on the rear side.
8 - 33
CHAS
20 Nm (2.0 m · kg, 14 ft · lb)